Owned by the drivers......Governed by the drivers

The SRL is a league of all half-scale stock car manufacturers. This opens the door for ridged and suspended manufacturers to run under a unified group. All manufactures and their product will fall under specifications laid down by the SRL. The SRL will sanction both local and professional events. The "Pro Cup" currently known as the South Atlantic Pro Championship will introduce a national traveling pro series to aid in the growth of half scale motorsports.

The Scale Racing League was formed to unify competition of half scale late model stock car racing. The Scale Racing League is a driver friendly organization, dedicated to the success of its racers.

The SRL sanctioning brings with it insurance and a well-developed rulebook. The intent of the SRL is to produce nationally recognized rules and regulations that have ZERO room for interpretation. All members will be kept up to date with newsletters and scheduled meetings.

The future of our sport is changing. Car counts are deciding the tracks we are eligible to run and sponsors have a short list of reasons to get involved. A unified effort between manufacturers and suppliers will encourage larger car counts at the greatest tracks in the country &endash; this will ad exposure to our sport. This translates into sponsorship for the competitors.

 AVENGER 2000 HALFCUP

Avenger HalfCup Features and Options.

The jig used to manufacture the Avenger HalfCup was built utilizing the lasted in computer controlled machinery. This allows for precise construction of the frame, cage and suspension members. This translates into a "free" rolling and consistent chassis for our customers.

The Avenger HalfCup utilizes Upper and lower control arms for front suspension travel. The upper control arm has Fast Adjust (tm) camber adjustments while the lower is located within the frame with shims. The adjust ability of the suspension is incredibly easy. You will never need to remove a bolt again - Just break the jam nuts loose and dial in some camber or loosen the nut on the lower and swap some shims to set the caster - Easy, at the track suspension changes was a mandatory in the design stages.

Our Hex shaped toe rods allow you to change the toe settings without marring the surface. Never again will you need a pair of pliers.

The suspension mounts on the Avenger HalfCup are tough and beefy. Strong, ridged mounts are key to reducing flex and movement while you are out on the track. The setup you obtain in the shop will be the setup you race with. This allows repeatability of setups as well.

VanK wheels were chosen for the Avenger HalfCup for two reasons: 1) Strong, thought out design 2) Great looks. In the world of motorsports it is sometimes difficult to obtain both of these attributes in an affordable package, VanK has proven that not the case with these wheels. This wheel was specifically designed for half scale cup cars and has had NO failures over the five years it has been manufactured.

The steering system utilizes Stiletto Products rack and pinion steering racks. Smooth steering is a must if you want to be fast and this rack is smooth. Constructed of aluminum and steel this rack will give you years of turning left, fast.

PRO Shocks based in Lawrenceville, Georgia supply us with the Aluminum bodied coil over shocks that prop the four corners up on the Avenger HalfCup. PRO Shocks is one of the biggest names in motorsports shocks and houses a large facility that is ready to supply and repair your damaged shocks. That is right - These shocks are REPAIRABLE unlike the throw away versions used on some chassis out there. The cost of repair in most cases is 1/4 of the price to replace.

Just like the Avenger HalfCup's big brother we rely on Kirkey aluminum racing seats. Available from 13" to 17" widths the Kirkey seat is comfortable and safe.

Keeping you strapped into that seat is a set of Safe-Quip safety belts. These 3" wide, quick release style 5 point harnesses will keep you safe and sound. Safe-Quip designed these belts specifically for the Avenger. Safe-Quip also supplies the window nets that will keep your arms inside the cockpit.

Avenger HalfCup Specifications.

Wheelbase 60"

Track 45"

Overall Length 110"

Overall Height 33"

Overall Width 46"

Approximate Dry Weight 420"

Engine: Honda GX390 - 4 Stroke, OHV single Cylinder - Air Cooled - Electric Start

Body: Hand Layed Fiberglass - 3 piece design - Lexan Windows - Metal Latches - Available in Monte Carlo and Taurus with Grand Prix in early 2000

Chassis: 1 1/4 Square Frame Rails with 1 1/8th by .065 cage structure - Fast Adjust (tm) upper control arms - Shimmed Lower control arms - Toe Adjustments - Movable Pedals - Rack and Pinion steering - Aluminum body adjustable coil over shocks - Adjustable rear suspension

Wheels and Tires: 8 by 6.5 VanK wheels - Polished or powder coat finish - Lightweight, triangulated design - 15 X 7 American Racer Slicks

Other Standard Features: Kirkey aluminum seat - Dual caliper disc brake - Safe-Quip 5 point harness and window net - Quick release steering hub

Avenger HalfCup Stages.

 STAGE ONE - $1550 msrp

 * Bare Avenger HalfCup Chassis

* Rear Cradle

* Left & Right Upper Control Arms

* Left & Right Lower Control Arms

* Panhard Bar with mount

* Sheet Aluminum dash and wheel wells

 The Avenger Stage one is perfect for the car owner looking to upgrade into suspended minicups or replace a worn chassis. Just paint or powder coat the chassis and bolt on the items from your current minicup or check out our Online Catalog for the items you may need.

 ------------------------------------------------------------------------

 STAGE TWO - $5750 msrp The Avenger HalfCup stage two comes with all the parts needed to assemble your very own Avenger HalfCup. ALL WELDING IS DONE for you at the factory, All you need to do is paint or powdercoat the chassis and start bolting it together. Some knowledge of automobiles and/or mechanical ability is a plus. this kit takes about 5 to 10 hours to assemble.

 ------------------------------------------------------------------------

 STAGE THREE - $6350 msrp Stage three is a completely assembled Avenger HalfCup ready to put on the track. We powdercoat the frame black or any color you choose and bolt it together. Some seat mounting will be required to position for the driver.

Index / Introduction / History / Search / Showroom / Museum / Sponsors

Sponsor the Pontiac!

Member of Motorsports Link Network